SIMADRE UNT 5020D 110/220V 50A PLASMA CUTTER 200A TIG ARC MMA WELDER w Foot Pedal (RETIRED)
This is a powerful SIMADRE UNT CT5020D DUAL 110/220V 200 AMP TIG/ARC/MMA WELDER and 50 AMP PLASMA CUTTER with AMP Controller Foot Pedal - BRAND NEW 2015 MODEL !!!
This machine is brand new and tested before shipping which assures that you do not receive a DOA unit. The percentage of defective units is below 1%
High working efficiency, DC output
3" Per minute at 1" Steel (Severance Cut), 7" Per minute at 3/4" Thick Steel, 17" Per minute at 1/2" Thick Steel
Machine size is 21 inches long x 8 inches wide x 11 inches high. This machine comes with powerful torch, ground clamp and cables, air filter/regulator and free consumables.
Machine is equipped with a large cooling fan.
Machine is Thermostatically protected for larger life span
Machine is with advanced inverter technology and high cutting frequency - V-MOSFET from TOSHIBA/FUJI.
Affordable: In terms of the quality and performance, it is similar and in some cases surpasses well known USAmade machines. You'll find the price you'll pay for this machine to be two thirds less than those other brands.
Works in both 50 and 60 Hz with operating air pressure of 60-75 psi @ 4.5 cfm.
The newer semiconductor circuits in these machines are designed quite well. With reasonable care it should provide many years of trouble-free service.
Certification: CE, CCC, CSA and ISO-9001 certification
Specifications:
Input voltage - AC 110/220±15% 50/60Hz
Input Power Capacitance - 7.1 kva
No-load loss(W) - 40
Duty cycle (%) - 60
Power factor - 0.93
Efficiency (%) - 85
Insulation class - B
Protection class - IP21
Input current(A) TIG - 21 MMA - 32 CUT - 28.6
Rated output current TIG - 200A MMA - 200A CUT - 50A
Current range TIG - 15-200 MMA - 15-200 CUT - 20-50
No load voltage(V) TIG - 62 MMA - 62 CUT - 250
Cut thickness(mm)- 1-16
Arc-leading TIG - HF vibrate MMA - Touch CUT - HF vibrate
Ships with:
Plasma Cutter - Inverter Unit
Ground Cable & ground clamp
Torch with hose
Electrodes
Tips
Ceramic shield cups
Air filter/regulator, hose, clamps, mounting bracket
Owners manual
Buyer shall provide:
Air supply required - 4.5 CFM @ 75 PSI
220 or 110 VAC power source & plug
This machine is brand new and tested before shipping which assures that you do not receive a DOA unit. The percentage of defective units is below 1%
High working efficiency, DC output
3" Per minute at 1" Steel (Severance Cut), 7" Per minute at 3/4" Thick Steel, 17" Per minute at 1/2" Thick Steel
Machine size is 21 inches long x 8 inches wide x 11 inches high. This machine comes with powerful torch, ground clamp and cables, air filter/regulator and free consumables.
Machine is equipped with a large cooling fan.
Machine is Thermostatically protected for larger life span
Machine is with advanced inverter technology and high cutting frequency - V-MOSFET from TOSHIBA/FUJI.
Affordable: In terms of the quality and performance, it is similar and in some cases surpasses well known USAmade machines. You'll find the price you'll pay for this machine to be two thirds less than those other brands.
Works in both 50 and 60 Hz with operating air pressure of 60-75 psi @ 4.5 cfm.
The newer semiconductor circuits in these machines are designed quite well. With reasonable care it should provide many years of trouble-free service.
Certification: CE, CCC, CSA and ISO-9001 certification
Specifications:
Input voltage - AC 110/220±15% 50/60Hz
Input Power Capacitance - 7.1 kva
No-load loss(W) - 40
Duty cycle (%) - 60
Power factor - 0.93
Efficiency (%) - 85
Insulation class - B
Protection class - IP21
Input current(A) TIG - 21 MMA - 32 CUT - 28.6
Rated output current TIG - 200A MMA - 200A CUT - 50A
Current range TIG - 15-200 MMA - 15-200 CUT - 20-50
No load voltage(V) TIG - 62 MMA - 62 CUT - 250
Cut thickness(mm)- 1-16
Arc-leading TIG - HF vibrate MMA - Touch CUT - HF vibrate
Ships with:
Plasma Cutter - Inverter Unit
Ground Cable & ground clamp
Torch with hose
Electrodes
Tips
Ceramic shield cups
Air filter/regulator, hose, clamps, mounting bracket
Owners manual
Buyer shall provide:
Air supply required - 4.5 CFM @ 75 PSI
220 or 110 VAC power source & plug
