SIMADRE 5000D 110/220V 50AMP DC INVERTER PLASMA CUTTER
SIMADRE CT5000D 50 Amp Dual Voltage Plasma Cutter
BRAND NEW MODEL with BETTER CONTROL PANEL and High-Performance Cutting Torch and Free Consumables
DIGITAL DISPLAY V-MOSFET TECHNOLOGY AND CSA /CE APPROVED
It is Brand New DUAL VOLTAGE 50Amp Plasma Cutter Welder with High Performance Cutting Torch.
SIMADRE 50 Amp Dual Voltage Cutters are very stable machines, please look up all the excellent feedbacks we receive from our customers on our 50 Amps cutters.
This Unit is portable and operational on dual voltages. This machine weights only 20 lbs and the box size is approximately 17 inches Length x 8 inches width x 16 inches height. This machine is brand new and fully tested before shipping which assures that you do not receive a DOA unit, so you will find that the package has been opened for machine testing purposes.
Affordable: In terms of the quality and performance, it is similar as other well-known cutters. But the price is much lower than those machines.
Portable: This machine weights only 20 lbs and the box size is approximately 17 inches Length x 8 inches width x 16 inches height. This machine comes with torch and ground clamp and cable, air filter, regulator and initial consumables.
The newer semiconductor circuits with genuine Fuji/Toshiba MOSFET component in this machine is designed quite well. Cooling system is using advanced Germany equipment. With reasonable care it should provide many years of trouble-free service.
After all, this machine is powerful and well-equipped with same functions as other brands in the market!!!
Important New Features:
Better controlling mechanism
Digital Display on Panle
FUJI/TOSHIBA Transitors (MOSFET)
PAPST Advanced German Colling System
3/4" Rated with 1" Servance Cut
Voltage 110/220V Available
Duty Cycle Cycle 60% at 50 Amps and 100% at 30 Amps
Cutting Thickness: 5/8 inch clean cut with 7.5 inches per minutes; 0.8 inch clean cut with 5 inches per minutes 1 inches severance cut with 2.5 inches per minute
Rated Ouput Current 50 Amps under both AC 110V and 220V
Frequency 50 and 60 Hz with operating air pressure as 75 psi @ 5 cfm
Package Includes Plasma Cutter - Inverter Unit, Ground Cable & Ground Clamp, Torch with Hose, Electrode, Nozzle, Ceramic Shield Cup and Swirl Ring, Air Filter/Regulator, Hose, Clamps, Mounting Bracket and Owner Manual
Users need to install either 110V or 220V power plug and prepare own air compressor
BRAND NEW MODEL with BETTER CONTROL PANEL and High-Performance Cutting Torch and Free Consumables
DIGITAL DISPLAY V-MOSFET TECHNOLOGY AND CSA /CE APPROVED
It is Brand New DUAL VOLTAGE 50Amp Plasma Cutter Welder with High Performance Cutting Torch.
SIMADRE 50 Amp Dual Voltage Cutters are very stable machines, please look up all the excellent feedbacks we receive from our customers on our 50 Amps cutters.
This Unit is portable and operational on dual voltages. This machine weights only 20 lbs and the box size is approximately 17 inches Length x 8 inches width x 16 inches height. This machine is brand new and fully tested before shipping which assures that you do not receive a DOA unit, so you will find that the package has been opened for machine testing purposes.
Affordable: In terms of the quality and performance, it is similar as other well-known cutters. But the price is much lower than those machines.
Portable: This machine weights only 20 lbs and the box size is approximately 17 inches Length x 8 inches width x 16 inches height. This machine comes with torch and ground clamp and cable, air filter, regulator and initial consumables.
The newer semiconductor circuits with genuine Fuji/Toshiba MOSFET component in this machine is designed quite well. Cooling system is using advanced Germany equipment. With reasonable care it should provide many years of trouble-free service.
After all, this machine is powerful and well-equipped with same functions as other brands in the market!!!
Important New Features:
Better controlling mechanism
Digital Display on Panle
FUJI/TOSHIBA Transitors (MOSFET)
PAPST Advanced German Colling System
3/4" Rated with 1" Servance Cut
Voltage 110/220V Available
Duty Cycle Cycle 60% at 50 Amps and 100% at 30 Amps
Cutting Thickness: 5/8 inch clean cut with 7.5 inches per minutes; 0.8 inch clean cut with 5 inches per minutes 1 inches severance cut with 2.5 inches per minute
Rated Ouput Current 50 Amps under both AC 110V and 220V
Frequency 50 and 60 Hz with operating air pressure as 75 psi @ 5 cfm
Package Includes Plasma Cutter - Inverter Unit, Ground Cable & Ground Clamp, Torch with Hose, Electrode, Nozzle, Ceramic Shield Cup and Swirl Ring, Air Filter/Regulator, Hose, Clamps, Mounting Bracket and Owner Manual
Users need to install either 110V or 220V power plug and prepare own air compressor
